Ghost Immobiliser Installation

Protect your pride & joy from car thieves by putting in an immobiliser ghost. Our TASSA-certified system guards against hacking, key cloning and bypassing the vehicle immobiliser.

The system is hidden within the wiring loom in your vehicle, so it is completely inaccessible to anyone who is looking. It works by creating pin code push sequences through existing buttons on the steering wheel, door cards, and centre console.

No circuit cuts

A car is a valuable possession that you spend hours of work to obtain, which is why owners want to protect their car from theft. Traditional security systems, such as alarms or wheel locks, can be easily bypassed by thieves. Ghost immobilisers are highly-effective solution that operates silently and isn’t easily detected by modern thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle via buttons on the steering wheel, dash and door panels. This creates an unique pincode only accessible to you. The code can be changed at any point and can be up to 20 digits in length, based on what you prefer. It also includes a secure emergency code that you can utilize if you forget your PIN.

The ghost immobiliser could also be used to prevent relay boxes from transferring your car key’s signal from inside your home, which will unlock the doors and then start the vehicle. It could even block techniques of stealing your car such as OBD port hacking. The device is small and weatherproof, so it’s difficult to detect and is also difficult to alter with.

The bmw x6 ghost installer immobiliser comes with a further advantage: it can be installed in your vehicle without leaving permanent marks. It is ideal for those who plan to sell their car in the near future. It’s also quicker and more simple to install when compared to a factory-fitted model.

The autowatch ghost installers west midlands Ghost, a revolutionary new generation device, stops thefts from cars that are not connected to the CAN network of a vehicle and using the buttons to generate an unique PIN code. This is a hidden device that can be set up without severing any wires and does not require any additional key fobs. It is also connected to the original ECU of the vehicle, thus preventing thieves from by stealing it using a new key. This system is TASSA certified and can be linked to an International Security Register, allowing owners peace of mind knowing that their vehicles are protected against theft.

No RF scanning

You’ll want to safeguard your vehicle from theft when you have spent a lot of money and effort to customize it. Installing an immobiliser is one of the best ways to prevent theft. It will prevent your vehicle from starting until you enter an individual code. You can create a 20-digit PIN by pressing the buttons on your dashboard or the steering wheel. This will ensure that only you have the right to drive your car. You can also create a valet and service mode that allows you temporarily to start your car without entering the PIN code. This will allow technicians to work on your vehicle without you being present. This is a great feature for those who want to save time and make their life easier.

ghost immobiliser fitting near me immobiliser fitting [recent Legra blog post] immobilisers, a new generation device, connects to the CAN data network of your vehicle. It uses buttons on the dashboard as well as the steering wheel to set a PIN number. It is designed to be discrete and has no light or sound to signal it, and can be fitted anywhere on the vehicle, without disturbing the aesthetics of your beloved vehicle.

This stealthy system is TASSA approved and could reduce the cost of insurance. It also has an ability to track your vehicle, which can locate your vehicle even if it’s been stolen. This is great if you own a rare expensive vehicle which you’ve invested many hours customizing.

Autowatch Ghost, in conjunction with the iPhone app, allows you to remotely start your vehicle if you have forgotten your PIN code or are not able to enter your vehicle. This feature is perfect if you have to do some errands, or pick up your children and do not want to let someone else drive your car. This feature is useful when you need to take your car in for repair or service.

The Ghost is unique in that it does not transmit or detect radio frequency and is therefore undetectable by thieves who use RF scanning and code grabbing technology. It can also safeguard your car from key copying, ECU swapping and other common methods of car theft.

No key cloning

Ghost immobilisers can be a great way to protect top-end vehicles and stop key duplicates. They stop your vehicle from starting without a PIN code being entered with the regular key fob. This makes it very difficult for thieves to rob your vehicle and could discourage them from attempting it in the first place. This is an especially good idea if you’ve spent lots of time and money personalising your vehicle or have a unique or expensive model.

These immobilisers are linked to the vehicle’s CAN network and are completely concealed, which means that their presence is not obvious. It is also impossible for a thief to detect the device by using radio frequency scanning or code grabbing technology. This means that a thief will need to wait longer to steal your vehicle.

To bypass the system, thieves must be aware of the unique pin code and the location of the Ghost. The pin code is exclusive to you and you can change it as often as you need to. The pin you select is easy to remember, but mathematically impossible for anyone else to understand. The engineer will also have provided an emergency PIN code in case you forget the pin.

The Ghost CAN Bus immobiliser could be easily mounted anywhere on your vehicle. It can be used with all vehicles and can be fully customized to match your car’s look. It is also easy to use and cost-effective. The device can be transferred to another vehicle, if it is compatible with the new vehicle.

The CAN bus immobiliser is also compatible with a number of other security features. It can, for example, detect damage to the vehicle and alert the owner. It will also shut off the engine in the event that the vehicle is being manipulated. The system will protect your vehicle from hacking and key duplication. It can also detect vibrations and contact with the vehicle. In addition, it could notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This stops thieves from getting into your vehicle to disable the alarm, turn off your key fob, and create new keys. This technology is a step up over the traditional methods used by thieves to steal vehicles in the past. The CAN data network means that the system won’t be affected by disconnecting or replacing your battery.

The autowatch ghost installers west midlands Ghost, the first non-detectable immobiliser for CAN bus aftermarkets worldwide, safeguards against key-cloning, hacking, and replica car theft. It is not equipped with LED indicators or key fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to let you create a unique PIN sequence (up to 20 button presses) which must be entered before you can drive your vehicle away.

Modern thieves use diagnostics to identify circuit cuts on your vehicle. They can bypass immobilisers that require a lot of wiring or are built into the wiring. The Ghost is weatherproof, does not require additional wiring and cannot be identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft devices.

A Ghost immobiliser also has a significant advantage: your vehicle will only be started by a person who knows your PIN and physically has access to your vehicle. This is an advantage over traditional security systems that can be bypassed by simple modification of cables or a screwdriver.

You can easily reset your PIN in case you forget it by using the emergency PIN reset feature on a computer or mobile phone. This is useful if you want to start your vehicle after having left it in a garage, or using the valet parking service.

The Autowatch Ghost 2 has been accepted for insurance by TASSA and is able to be installed by our authorized installers. It features a QR fingerprint system for components to be identified, which will enable the return of stolen components should they be discovered. It can also be turned into a’service mode’, which will allow the engine to start when the vehicle is in a garage or using valet parking however, you must enter your PIN code in order to leave the vehicle.