Choosing Upvc Window Replacement Hinges

Selecting and fitting upvc windows replacement hinges isn’t as complicated as you think. Make sure the hinges’ arrows are facing the correct direction and then measure the thickness of the hinge arms on the frame that opens (13mm or 17mm).

There are several different types of hinges, each with their distinctive characteristics. This article will discuss some of the most common uPVC hinges, and their advantages.

Egress/Easy Clean Hinge

They are a great option for replacing or upgrading your fire escape window because they can open to a full 90 degree angle. They can be disengaged in an easy-cleaning position, allowing you to access the outside of windows without having to climb ladders or lean at risky angles.

Yale is among the most reputable and well-known brands in the world of home security. They work with all types of uPVC side-hung windows. They can be moved into the easy-clean position by pressing in a small button and then sliding the window sash to one side. When the window is closed, the sash will revert to its original position.

They are available in both 13mm and 17mm stack heights. Based on the size of your window we recommend using our Egress Selection Guide to determine which product is best for you.

These hinges are designed to work with a standard side-hung frame, either uPVC or aluminium. They come with an easy-to-use friction screw to alter the amount of resistance generated. This makes opening the window easier and reduces the chances of accidental closing during severe winds. They have been tested for more than 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

Without buttons or catches, The Nico Egress Easy Clean Friction Hinge is simple to operate and provides a convenient solution for emergency egress and safe cleaning. First, open the door hinge repair near me to the egress (full opening) position, then press the hinge retaining clip that is located on the inner side of the bottom corner. This will open both the top and bottom catches and allow you to move the sash towards the clean position. Close the window when you have the sash in an easy-cleaning position. This will set the hinges back to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as “Easy Clean”) are used to replace windows that open sideways for fire safety reasons. These types of window hinges open wider and faster than standard hinges to allow an expansive clear opening to escape in the case of a fire. This type of hinge is required in any room with a window as stipulated by building regulations.

The windows feature a friction stay that allows them to open to 90 degrees. They also let the opening sash slide across the glass when it’s opened and allows for easy cleaning without having to use ladders. The hinges do not have buttons or catches and operate with a simple, secure lever that can be accessed from inside the home.

The hinges are manufactured in the UK by Cotswold and come complete with a child safety restrictor for use throughout the day that can be overridden with a hidden button providing you with peace of mind that your children will not accidentally open the window too far. They are available in 13mm or 17mm stack heights.

To order these hinges, simply take a measurement of the length of your existing side-hung window double glazing hinge repairs which is fixed to the frame (see the article on measuring the length of your window hinges made of upvc). Choose the right size hinge from the list below.

Note that this measurement is taken from the hinge’s part that is attached to the frame and not the sash. The actual hinge length may be shorter or longer depending on how your old windows were manufactured. When choosing the size of the hinge, most upvc frames will fit with a height of 13mm, but if your old double glazed window hinge frame measures 17mm, choose this option. You can also install the 4mm packer to make up for the difference. All the hinges are supplied handed (1 left and 1 right). The hinges are not equipped with screws. They can be purchased separately if required. Our window repair screws made of upvc are highly recommended. They are specially made to improve the performance of your hinges and allow them to function smoothly for longer. They feature a less friction design and a better weather seal that is fitted with a new nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open a window completely. These child safety friction hinges are a great solution to this problem. They can be used in situations where ventilation is needed but cleaning or escape from the flame is not possible. They work by restricting the amount that the sash can open, and allow for the override of this restriction with the push of a button. They are available in 13mm or 17mm stack heights. They can be used for top and side-hung windows.

The Nico Restricted Egress Friction Hinges combine the benefits of a standard restrictor and an escape pivot to provide a simple but efficient way to meet building regulations. It is available in 13mm or 17mm stack heights and can be used for both top and side opening upvc window hinges replacement window. It is offered in a pair, where one hinge is the restricted egress and the second is unrestricted allowing one of these to be placed at the bottom of the sash while the other hinge is installed to the top.

These uPVC restrictive hinges have been tested to BS6375 Part 2 and are designed for use on a window that isn’t able to be fully opened, like a small child’s bedroom. The mechanism limits the amount the sash can open up to the safety level of 100mm and re-engages when the window is closed.

These uPVC friction-type hinges can be used with all types of windows. They are especially useful for windows that are hard to reach, like those in three-storey houses or those that require ladders. They can be combined by our security enhancements such as hinge guards and protection plates, or dog bolts to offer PAS 24 performance.

When replacing a hinge on a window, it is crucial to measure the length of the current hinge so that you can get replacements that are comparable in size. This can be done by looking at the picture gallery of the hinge before deciding the best place to put it. Top hung hinges are restricted on both sides, while side hung hinges are restricted only on one side.

Standard Hinge

A standard hinge is made of metal-to-metal contact and no extra parts to decrease friction. It is available in many finishes and has an NFPA-certified fire rating. For a quick way to determine the radius of your hinge, lay it flat and then line up the quarter and dime in two corners. If the quarter fits better, then the corner should be round to 5/8 inches.

The hinge you choose can enhance or ruin the appearance of your door. Matching the style and finish of your hinges to your door will give it a cohesive and attractive appearance.