Ghost 2 Immobiliser Problems

Designed to protect vehicles from key cloning and hacking The Ghost 2 immobiliser is a discreet device that can be installed without damaging your car. It stops your vehicle from starting unless you enter a specific sequence of buttons within your vehicle similar to a password on a mobile phone.

Stop/Start

Ghost immobilisers prevent vehicles from being stolen by preventing the engine from running until it has received the correct PIN code. This is done without altering the vehicle, and is undetectable by thieves. The unit communicates with the ECU on the CAN data bus to disable the vehicle. This system is similar to that used by car manufacturers for years. However, thieves cannot bypass it with a new key or key relay technology, Ghost immobiliser 2 like they can do with factory fitted systems.

Ghost is compatible with any vehicle with an engine, which includes motorhomes, vans, cars and caravans as well as bikes. The same system is compatible with electric vehicles. It’s a great alternative to wheel clamps and steering wheel locks.

When the Ghost is activated, it will block all buttons in your vehicle and stop the ignition from being started unless a PIN code has been entered first. This can be done via the Android or Apple mobile apps or by manually entering the code via your key fob. If the incorrect code is entered, the app will display an indicator light. The ghost 2 immobiliser cost will then not allow the vehicle to start again. This is a great deterrent. if the vehicle can’t be started the thief will move on to another target.

The Ghost is a small weatherproof device that is able to be hidden in the most difficult to access parts of your car. It is extremely simple to install, taking an average of 20-30 minutes for each vehicle. It is also very easy to remove should you decide to change your vehicle or hand it in to valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognised by some insurers. It is also equipped with a secure emergency Pin Code override and features a Service/Valet Mode that can be activated using an app button or using your key fob.

Disarm

In contrast to the mechanical anti-theft devices, which can be removed, ghost immobilisers are hidden and integrated into the vehicle. They are near impossible to bypass or hack and even if found, a thief will not be able to start the engine. Ghost immobilisers are able to prevent key cloning and devices spoofing signals and signal jamming. These are methods that thieves employ to gain entry into vehicles equipped that have standard immobilisers.

The immobiliser transmits a code to the ECU. If a incorrect code is received and the vehicle does not start as the engine won’t fire up. It is possible to disable a ghost immobiliser with the aid of a software program, however it would be extremely difficult and time-consuming to do so. Only an authorized installer is able to install and use the software.

The Ghost immobiliser, which is a tiny device, is hidden in the wiring loom of your vehicle. It is not visible to the naked eyes once installed. It won’t show up on diagnostic systems, it does not have LED indicators, and it does not connect to the engine via the OBD port. It communicates silently via the CAN data circuit.

The system will prevent the vehicle from starting unless it receives a user defined PIN code sequence. The PIN code is entered via buttons on the steering wheel, door panels or centre console. This is a more secure method to safeguard the car since it doesn’t require an additional remote control or key fob.

In addition, Ghost offers a service mode which can be activated using the application on your mobile phone. This lets you give your keys to someone else to use for valet parking or service, without needing to enter a disarm sequence.

You should never remove the system from your Ghost by yourself, regardless of whether it’s in service mode. This could damage your engine. It is recommended that you contact an TASSA certified installer who will be able to remove the system in a safe and secure manner. Our newest ghost immobiliser tracker II immobilisers also include a special QR fingerprint sticker that is hidden in different locations of your vehicle. these are linked to our global security register. In the event that the system is removed and then sold on the black market it will be linked back to the original owner.

Anti-Hijack

The anti-hijack function is a very important feature of the Ghost Immobiliser 2. This system functions as an intelligent key and what is a ghost immobiliser among the most secure ways to protect your vehicle from theft. The Ghost system will automatically turn on the hazard light and stop the car’s engine when the ignition is on and the vehicle is stationary. This allows the driver and passengers time to press the secure button before the system is reactivated.

Unlike many competitor systems that simply stop the engine whenever the ignition is switched to on and on, the Ghost system has a unique controller and timer that will shut off the valve that cuts off fuel when it is activated after an agreed-upon time, even when the ignition is in operation! This delay time period needs to be long enough to allow the victim of the vehicle to move away from the location of the hijacking and a sufficient distance from the stalled vehicle before the system can reactivate.

The Ghost comes with an additional layer of security that prevents common hacking methods used to gain entry to modern vehicles, such as relay attacks and key range expanding. The Ghost system communicates in a silent way and does not emit signals that could be snatched by thieves with code-grabbing technology or RF scanning.

The Ghost system also comes with a Service / Valet mode that allows your vehicle to be temporarily started and driven without the requirement of an PIN code. This is ideal for those who park their car and only need to leave it for a brief time in order to open the garage door or place groceries in the boot. The system will end service mode depending on the speed and time or through the simple PIN code entry procedure that gives you total security knowing that only you can use your car!

Keyless Entry

With the increasing trend of contactless car theft numerous people are considering additional security options. This is particularly applicable to those who have put in time and money to customise their vehicles or own expensive cars. Immobilisers with add-ons are a great method to stop this kind of theft, as they can prevent your car from starting until the correct pin code has been entered, along with your key fob.

Immobilisers are made to block various vehicle circuits, including those that control the starter motor and the fuel pump. They also are able to shut the car alarm to draw attention and scare off any potential thieves.

These devices communicate directly with the engine control unit using the CAN data network. They hinder thieves from gaining access to it by installing a replacement ECU or ghost immobiliser 2 by using key programmers. The immobilisers can be installed in a discreet manner inside your vehicle, leaving no traces and are completely invisible to the tools hi-tech thieves use.

As opposed to other systems that require a specific application or tag that is worn on the person carrying it and a Ghost immobiliser can only be disarmed by pressing a series of electronic buttons that are already present on your steering wheel, door panel, and the centre console, which allows you to select a customized pin sequence. The pin can be changed as often as you’d like, meaning the device is as secure as a credit card and can be more difficult to hack due to it requiring up to 20 press.

Ghost also has a Valet/Service mode that allows you to deactivate the system if your car will be handed over for valet parking or for service, enabling it to operate within predetermined parameters such as a 30mph speed limit which means you don’t need to worry about your vehicle being driven at a reckless speed. It is then reactivated with the original key or the appropriate entry code.

This makes it the most efficient and secure aftermarket CAN-based immobiliser on the market and is fully insurance approved by Thatcham as an accessory to your vehicle when installed by one of our accredited installers. The ghost 2 immobiliser cost 2 immobiliser is also equipped with six QR fingerprint labels as well as an ISR contact card with your unique QR code and an emergency number that is secure that are kept in your purse or wallet of your vehicle.