Ghost 2 Immobiliser Problems

The ghost car immobiliser 2 immobiliser, designed to protect cars from key cloning or hacking is a discrete device that can be installed without damaging your vehicle. It prevents your vehicle from starting until you press the correct sequence of buttons inside your vehicle, similar to the password of a mobile phone.

Stop/Start

Ghost Immobilisers protect vehicles from being stolen by preventing the engine from starting until it has the correct PIN code. This is done with no modification to the vehicle and is totally undetectable to thieves. The unit is directly connected to the ECU via the CAN databus to immobilise a vehicle. This system is very like the one car manufacturers have been using in their cars for many years however, the criminal isn’t able to add a key or utilize key relay technology to bypass it as they could with factory-installed systems.

Ghost is compatible with any vehicle with an engine, which includes cars, vans, motorhomes, caravans, and bikes. The same system can be used on electric cars. It is an excellent alternative to wheel clamps and steering wheel locks.

When the Ghost is armed it will block all buttons in your vehicle and stop the ignition from starting without a PIN code having been entered first. You can enter the code by hand or using the Android or Apple app. If the wrong code is entered the app will show an indicator light and the Ghost will not allow the vehicle to start again. This is a great deterrent. in the event that the vehicle cannot be initiated, the criminal will then move on to a different victim.

The ghost car immobiliser is a small weatherproof device that can be hidden in the most difficult-to-access parts of your car. The installation process takes between 20 and 30 minutes for each vehicle. It is also very simple to remove should you choose to move your vehicle around or return it for valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system, and is recognized by certain insurance companies. It also has a secure emergency Pin Code Override, and a Service/Valet mode which can be activated by pressing a button in the app or by using your key fob.

Disarm

Unlike the mechanical anti-theft devices, which can be removed ghost 11 immobiliser immobilisers are hidden and integrated into the vehicle. Even if they were discovered, thieves would not be able to start the car. They are nearly impossible to hack or bypass. Ghost immobilisers are capable of preventing key cloning, Ghost Immobiliser 2 as well as signal jamming and devices spoofing. These are methods that thieves use to gain access to vehicles that have standard immobilisers.

An immobiliser functions by sending an electronic code to the ECU (electronic control unit). If a wrong code is received and the vehicle does not start since the engine won’t fire up. It is possible to disable a ghost immobiliser with a software tool, but it’s very difficult and time consuming to accomplish this. The software can only be installed and operated by a authorized installer.

The Ghost immobiliser is a tiny device that is tucked away in the vehicles wiring loom and is not visible to the naked eye once installed. It will not show up on diagnostic systems, there aren’t LED indicators, and it does not communicate with the engine via the OBD port. It communicates in silence through the CAN data loop.

The system will stop the vehicle from starting unless it is able to receive a user-defined PIN code sequence. This code is entered using buttons on the steering wheels and door panels as well as the centre console. This is a more secure method of protecting your vehicle as it does not require a key fob or remote control.

In addition to this Ghost has a service mode which can be activated through the application on your mobile phone. This lets you hand over your keys to someone else to use for valet parking or service, without the need to enter an arm-disarm sequence.

It is not recommended to remove the system from your Ghost by yourself, regardless of whether it’s in service mode. This could cause damage to your engine. It is best to contact a TASSA-verified installer who can safely and effectively remove the system. Our newest GHOST immobilisers have a specific fingerprint QR sticker hidden in various parts of your vehicle. They are linked to our security register. In the event that the device is removed and then is sold on the blackmarket it will be able to trace the original owner.

Anti-Hijack

The anti-hijack function is a key feature of the Ghost Immobiliser 2. It functions like an intelligent key and is among the most secure methods to keep your car safe from thieves. The Ghost system will automatically activate the hazard light and stop the car’s engine when the ignition is switched on and the vehicle is stationary. This allows the driver and passengers time to press the secure button before the system can be activated.

In contrast to other systems that simply stall the engine whenever the ignition switch is turned on, the Ghost system is based on a specific controller and Ghost Immobiliser 2 timer unit that will shut off the fuel cut-off valve 14 if it is activated after an agreed-upon time even if the ignition is still in operation! The delay time interval must be sufficiently long to allow the victim of the vehicle to drive away from the location of the incident and to maintain a sufficient distance from the stalled vehicle before the system is able to reactivate.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it comes with an additional security feature that blocks common methods of hacking used to gain access to modern cars such as relay attacks key range extending, key range hacking and ECU swapping. This is due to the fact that the Ghost system communicates in a quiet manner and does not emit signals that could be picked up by a thief using codes or RF scanning technology.

The ghost autowatch immobiliser system has a service / valet mode that allows your car to be re-started and driven, without the need for PIN code. This is ideal for parking your vehicle and need to leave it for a short period of time, such as for instance, to put your groceries in the boot or open a garage door etc. The system will end the service mode based upon the speed and duration or through the simple input of a PIN code process. This will give you complete assurance that only you can drive your car!

Keyless Entry

With the rise of car thefts that are not involving contact, many customers are seeking out additional security options. This is particularly relevant for those who have put time or money in personalizing their vehicle and own rare/expensive vehicles. Immobilisers that are added to your vehicle can be an effective method to stop this type of theft as they can prevent your car from starting until the correct pin code has been entered, along with your key fob.

Immobilisers are made to block various vehicle circuits which include those that control the starter motor and fuel pump. They also can shut the car alarm to draw attention to and frighten away any potential thieves.

These devices connect directly to the engine control unit through the CAN data network and prevent the thief from bypassing it by installing a replacement ECU or by using key programmers. The immobilisers can be installed discretely inside your vehicle, leaving no trace and are completely invisible to the tools hi-tech thieves use.

The Ghost immobiliser is different from other systems that require drivers to carry an app or tag. Instead, you are able to choose your own pin sequence by pressing an image on your steering wheel, door panel, and centre console. The pin can be easily changed to make the device as secure as a credit card. It is also more difficult to hack because it takes up to 20 presses.

Ghost also offers Valet/Service mode, which permits users to deactivate it when you are going to give your vehicle for valet parking, or service. This allows the system to operate within parameters, such as a 30-mph speed limit. The system can be activated with the original key or entry code.

This makes it the most effective and secure aftermarket CAN immobiliser on the market, and what is a ghost immobiliser insurance-approved by Thatcham as an optional accessory for your car when installed by one of our accredited installers. The Ghost 2 immobiliser comes with six QR fingerprint labels as well as an ISR contact cards containing your unique QR codes, and an emergency code that is secure. They are all stored in your wallet or purse.