Double Glazing Lock Repairs

Having quality locks on your windows and doors can stop burglars from getting into your home. They aren’t likely to break glass or attempt to squeeze through open windows.

Some double glazing owners, however, have had issues with their window or door lock following the installation. Luckily, these problems are usually fixable and don’t require to buy new double glazing.

Broken or faulty locks

If your uPVC door or window lock is broken or faulty and requires a locksmith, they can fix it for you. They will be able to repair double glazing window the striker plates, hinges and locks on your double glazed window repairs near me-glazed. They can also reposition the cylinder to fix any misalignment problems that may be causing the handle to not function correctly.

If the key fits into the lock, but it doesn’t turn or is difficult to insert, the mechanism might be seized up. This can be caused by dirt or grime getting stuck in the mechanism. If this is the case it could be possible for the lock to be cleaned and lubricated. Use a dry lubricant such as graphite or teflon, not oil, double glazed window Repair because oil can attract dirt, and cause it to stick to the inside mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant should work its way into the mechanism, and the lock should turn effortlessly.

A damaged lock can be caused by loose screws inside the mechanism of the lock. They may loosen, fall out, or even break completely, preventing the lock from being able to work properly. A screwdriver can be used to tighten these screws, but caution must be taken not to tighten them too much, since this could cause damage to internal components.

A broken lock can be dangerous for you and your family members, especially if you have young children. It is possible for them to open the door without your knowledge, and this can give them access to your home. If you’re worried about the possibility that this might happen, a vetted professional locksmith can assist you re-secure the double glazing doors.

Misty Glaze are a professional uPVC and double glazed Window repair glazing business in Lancing that can fix all types of faulty and damaged mechanisms, handles, cylinders and lock systems on both uPVC windows and doors. We can also modify the locking system on your uPVC windows or double glazing to meet your needs. This means that replacement windows and doors are not always required.

Handles that are broken or are damaged

Many double glazing repairs near me-glazed windows have a multi-point lock as part of the overall security package. This is a great option for those who are worried about potential burglars trying to gain access to their home. It is also a good idea to ask your locksmith about anti-lift blocks that can be installed in addition to the existing locks and help keep your window firmly secured in its closed position.

Handle locks can be damaged or fail. They are the first thing criminals will use to force open your window. Fortunately, the good news is that this is one of the easiest parts to fix.

Modern uPVC handles and aluminum handles are equipped with a multi-point locking mechanism, referred to as Espagnolette that is designed to resist forced entry. This security upgrade is often offered as an optional extra on new uPVC window installations. As an alternative upgrade, older handles made of aluminium or uPVC that are no longer in use can be upgraded to shoot bolt locking systems.

When a handle is faulty it is essential to get the handle repaired as quickly as you can. The damaged handles could stop the window from closing properly and allow drafts to enter. It may also be a weakness that burglars who are opportunistic could exploit, putting your family and belongings at risk of being taken.

To fix the malfunctioning mechanism, you must first access the window frame and then remove the damaged handle. The gearbox is then opened to determine the type of gearbox used to open the handle. This will permit a replacement that matches the profile and internal window frame mechanisms.

After the mechanism has been repaired the handle can be reattached using the original screws. We recommend replacing them with longer screws since they provide the most secure fit. The final step is to seal the handle using a clear sealant. This will protect it from further deterioration. Once you’ve completed this step the window should be functional again, and at a fraction the cost of replacing it.

Broken or damaged hinges

If your windows do not close correctly, draughts may get in, your home’s security measures will be compromised, and there is an increased risk of water damage or damp. Windows hinges that break or fail to function properly are a common occurrence and can be easily repaired.

If your uPVC windows don’t close or open and close, it’s likely hinges need to be repaired or replaced. Many window companies will require you to purchase an entirely new window unit to address this issue, but we are able to replace the hinges to save you money.

Window hinges are usually damaged by repeated use or weakening over time due to corrosion. In the event of a broken hinge, it’s crucial to take steps to prevent further damage by taking care not to make the window swing open or closed.

You can find the correct parts for your hinge by identifying its type. The most commonly used types of window hinges are Maco, Mila, Roto and other brands. Consult a professional to avoid purchasing parts that won’t fit with your existing hardware. This could cause further damage.

The hinges that are not working properly can cause major issue for your uPVC windows and doors. They can be the main source of noise, and they can also allow water to get into your windows.

To fix this issue, first make sure that the pin barrel on both sides of the hinge is aligned. If it’s not then tap the head pin using the hammer to create a shallow bend in the barrel of the hinge. This will hold the pin in position. Ask a friend to hold the doors while you remove hinge screws and hinges. Replace the hinges with those of a matching size and attach the screws using glue. Finally fix the hinges using clamps or weights until the glue is drying.

After you have repaired the hinges, you can reinstall the door. You can also reattach the handle. Replace the screws using wood dowels that are the same length as the original screw to ensure they are in line.

Glass that is broken or damaged

While uPVC windows do an excellent job of keeping the cold out and the heat in, they are susceptible to becoming damaged over time. This could include broken or damaged glass as well as defective locks. This is a problem that can be very expensive should it be neglected. It can also detract from the aesthetics of your house and can lead to loss of insulation, which is why it is essential to fix any damage as soon as possible.

If the glass is cracked but not shattered it is usually possible to repair double glazing window it yourself using the right tools and techniques. First, ensure that the area surrounding the glass is clean so that any shards don’t cause injury to anyone or are an accident hazard. Then, remove all broken glass pieces and dispose of them in the appropriate way. Then, put masking tape to the entire area to keep pieces of glass from scattering and sticking to your skin when you move them. If you’re dealing with a double glazing window repair-paned window it’s a good idea to fit the glass pane before glueing it back in place so that you know you’ll have enough space finish the project.

Use a clean, dry cloth to wipe down the surface of the broken glass and the frame prior to applying the glue. Follow the application and curing instructions, which may vary from product-to-product. You may need to clamp the glass that has cracked with lightweight clamps designed to support fragile materials, based on the angle.

After the adhesive has completely cured, carefully install the glass into the window frame. Make sure it is flush with the frame edge and that there aren’t any gaps between the glass sash as well as the frame. Avoid flexing the glass as you reinstall it in order to weaken the seal. This could lead to condensation or water infiltration.

If you have a glass door that’s completely shattered or has larger cracks, consult a professional glazier such as O’Brien(r) to organise the replacement. If you leave broken glass unattended, it could cause danger to pet and children, so it’s essential to act swiftly.