How to Programming a Subaru Key Fob at Home

It is possible that you need the key fob to be programmed by an automotive locksmith or Subaru dealer, based on how old your subaru replacement key fob is. This is typically done by connecting a programming machine to the computer in your car.

To program your Subaru unlock the driver’s side door using the door button and then close it. You will hear a chime from the instrument panel and the dome lights will light up.

Step 1: Locate the circuit board on your transmitter

There are a variety of ways to program your key fob. First, you must determine the kind of key fob you have. This can be done by taking a look at the shape of the key fob, or by listening to the car’s chime.

Once you have the details then you can begin the process of programming your keyfob home. To accomplish this, you’ll require a key made of metal and a flathead screwdriver. Open the key fob by twisting. Push the metal key into the case and release the battery by pushing the tabs that hold it in place. Replace the battery and put the case back together.

Step 2 2. Unscrew the Key Fob Case

Change the battery is a good idea, as it can bring back key fobs that have stopped working anymore. However, there are some situations where the buttons on the key fob may be broken. If you notice that the contacts made of metal on the button are loose, try soldering them in their place in order to get them back to function once more.

Make sure that you shut off your ignition and close your doors prior to you begin. Close the door on the driver’s side and press your door button 10 times in rapid succession. Then, you should hear the instrument panel chime and the dome lights will light up. This means you’re ready to move on.

Step 3: Insert the key fob into the ignition

Many online articles will tell you how much Does a subaru key fob cost to program your new or replacement key subaru lost subaru car keys keyfob at home. But, the majority of them do not provide precise instructions. Reprogramming an electronic key is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat of your Subaru with the engine off and the doors closed. Use the door button to unlock all the doors. Close and open the driver’s doors two more times. Inject and remove the ignition key (don’t rotate it) 10 times over 40 seconds. The system should chirp to confirm that the settings have been modified.

Step 4 Step 4: Switch on the ignition

It is crucial to understand that this method of programming a key fob only is effective if you have a working key. If not you can find an auto-locksmith or dealer who will be required to program a key for your Subaru Fort Bliss.

Once the key is programmed, it will be capable of starting your vehicle within a matter of five minutes. To begin, ensure that all doors are closed and the engine is turned off. Sit in the driver’s chair and open all doors by pressing the button on the door. Place the key into the ignition and turn it off to the first position (the electrical systems will turn on, but the engine is off), and then back to the off position ten times in quick succession.

Step 5: Unlock Driver’s Door

subaru legacy key fob offers a variety of high-end automobiles with key fobs that lock and unlock doors, turn on the engine, and defrost windows. These devices are sometimes not functioning.

To fix this problem then you should contact a locksmith or the dealer. This will resolve the issue and ensure that your vehicle is secure.

To accomplish this, you need to open the driver’s door and close it. Place the key into the ignition and turn it to position 1. Then, you can return it to the off position. Repeat this ten times in the row as fast as possible. After the tenth repetition, you should hear a sound.

Step 6: Press the Lock/Unlock button on the driver’s Door

The process of replacing the battery inside the Subaru remote key fob is simple. Open the exterior fob case. Use a flathead to pry the case’s interior open and remove the old batteries.

After removing the old battery, put in the new one and close the case. Sit in the driver’s seat and unlock all doors using the door button control. Finally, place the key in the ignition and turn it so that the electrical systems are on, but the engine is off. Repeat this 10 times until you hear the chime on the instrument panel. This will bring the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

The annoying chirp that can be heard when unlocking or locking a Subaru Key Fob from the outside of the vehicle is distracting for some owners. In some cases the chirp can be removed by opening and closing all doors and a double-click of the lock button on the key fob.

Switch off the ignition and shut all doors as well as the lid of the fuel-filler. Press and hold the lock side of the key fob’s lock button for 10 seconds. After this is done the instrument panel emits an audible chime. The chime signals that the door and fuel-filler lid are locked. It is possible to alter the setting so that doors lock automatically without pressing a button.

Step 8 Step 8: Enter the 8 Digit Transmitter Number

Note down the initial series of 8 digits and keep it in a safe place. Once you’re in the driver’s seat, shut the doors and turn the ignition to the first position. After 10 turns, your instrument panel should begin to sound once.

Then, you need to open the key fob case and look for the transmitter circuit board inside. There will be two or three sets of numbers (8-digits) on the circuit board. Take note of the first number sequence and follow the instructions in this guide to register the code in your vehicle’s system. For older models, this process might require a visit to the dealer.