Choosing Upvc Window Replacement Hinges

Selecting and fitting upvc windows hinges for replacement isn’t as difficult as you might imagine. Make sure that the hinges’ arrows are facing the correct direction and measure the thickness of the hinge arms on the opening frame (13mm or 17mm).

There are several different types of hinges, each with their distinctive characteristics. This article will go over some of the most commonly used uPVC hinges, as well as their benefits.

Egress/Easy Clean Hinge

They are a great choice for replacing or upgrading windows for fire escapes, as they open at a full 90-degree angle. They can be disengaged to a ‘easy-clean’ position that allows you to see the outside of windows without the need to climb ladders or lean at risky angles.

Yale is one of the most reputable and well-known brands in the field of home security. These hinges are suitable for any type of uPVC side-hung windows. By pressing a small button, the window sash is slid to the side and into the position that is easy to clean. After closing, the sash will automatically reset to its initial position.

They are available in both 13mm and 17mm stack heights. Utilize our Egress Selection Guide to help you determine the best product for your window.

These hinges are compatible with conventional side-hung frames made of aluminium hinged doors or uPVC. They come with an easy friction screw that can adjust the amount of resistance generated. This allows for easier opening of the window and reduces the chance of an accidental closure during high winds. They have been tested for over 30000 cycles and are in compliance with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to operate and has no buttons or catches. It provides a convenient and secure solution for emergency exit and cleaning. The hinge retention clip is located on the inner corner of the bottom corner. This will open the top and bottom catches and allow you to slide the sash back into the clean position. Close the window once you have the sash in the easy-cleaning position. This will set the hinges back to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as “Easy Clean”) are used to replace window hinges windows that open sideways to protect against fire. These types of hinges are more spacious and more efficient than standard hinges to allow a large clear opening to escape in the case of an incident of fire. Building regulations require that this kind of hinge should be placed in any room that has windows.

The windows feature an elongated friction that permits them to open at a 90-degree angle. They also allow the opening sash to slide across the glass when opened and allows for easy cleaning without having to use ladders. The hinges are easy to operate and don’t have complicated buttons or catchers. They can be operated from the inside of the house with a safe, simple lever.

The hinges, manufactured in the UK by Cotswold and Cotswold, have a child safety restriction for everyday use. This can be removed using a hidden button. You will have peace of peace of mind knowing that your children will not accidentally open the doors too far. The stack heights are 13mm or 17mm.

Take a measurement of the length of the side-hung window hinge that is attached to the frame. (See the article on measuring the size of Upvc window hinges). Choose the proper size hinge below.

Please note that this measurement is taken from the hinge’s point that attaches to the frame and not the sash. The actual hinge length could be shorter or longer depending on the way your windows were made in the past. When choosing the size of the hinge, most frames made of upvc will have a stack height of 13mm however if your previous window frame measures 17mm, you should select this option. You can also use the 4mm packer in order to compensate for the difference. All hinges are supplied handed (1 left and one right). The hinges do not come with screws. If required, these screws can be purchased separately. Our window repair screws made of upvc are recommended. These screws are designed to increase the performance of your hinges and allow them to work efficiently for a longer. They come with a lower friction design and a more durable weather seal that includes an encapsulated nylon reducer cap.

Restricted Hinge

There are times when a window needs to fully open and this can be difficult with hinges that are standard. These child safety friction hinges are a fantastic solution to this issue. They can be used when ventilation is needed but escaping or cleaning a fire is not feasible. They limit the possibility of opening the sash and allow overriding this restriction by pressing an appropriate button. They can be used for side- and top-hung windows and are available in 17mm and 13mm stack heights.

The Nico Restricted Egress Friction Hinge combines the advantages of a standard restrictor with a fire escape hinge to provide an effective and simple way to meet building regulations. It is available in 13mm and 17mm stack heights and can be used on both side and top opening uPVC window. It is offered in a pair, where one hinge is restricted egress, the other unrestricted allowing one of these to be installed to the lower part of the sash, while the other is fitted to the top.

These uPVC restricting hinges have been tested to BS6375 Part 2 and are designed for use on a window that cannot be fully opened like a small children’s bedroom. The mechanism restricts the distance the sash opens up to an appropriate height of 100mm, and re-engages once the window is shut.

As with the other types of uPVC friction hinges, these can be used on any type of window door repairs locks glass hinges and are perfect for hard to reach windows above ground level, three-storey flats or those that would normally require a ladder to access them. They can be upgraded with our range security enhancements, like hinge guards and protection plates for the hinge or dog bolts to attain PAS 24 performance.

It is essential to measure the hinges on your window in order to get replacements of the same size. The easiest method to accomplish this is by looking at the hinge in the gallery and determining the best place for it to be placed. The hinges that hang from the top can only be placed on one side, whereas the side-hung hinges can only be placed on one side.

Standard Hinge

Standard hinges feature metal-to-metal contacts and do not require additional components to reduce friction. It is available in a variety of finishes and also has an NFPA-certified fire rating. To determine the radius of your hinge, lay it flat and then line up a dime and quarter in two corners. If the quarter fits better then the corner should be rounded to 5/8 inches.

The proper hinge can enhance or ruin the appearance of your fix door hinge. Matching the style and design of the hinges to your door Hinge repairs will create an attractive and well-integrated look.