Protect Your Pride And Joy With The Ghost Immobiliser

auto ghost immobiliser Immobiliser can safeguard your valuable property from theft. This system is discrete and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence that can be up to 20 presses long. This allows your vehicle to start.

Simple change of PIN code

With the growing rate of vehicle theft, a lot of owners are looking to improve their security. There are a variety of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of them are equally effective in protecting your vehicle. While a tracking device can assist you in locating your vehicle in the case of theft, it will not prevent the crime from happening in the first in the first place. Immobilisers, on the contrary does exactly what it says on the label: it shuts off the engine of your vehicle so that it cannot be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

By using the buttons that are already present in your car, the ghost device creates a unique sequence which must be entered before the engine will start. This can be accomplished by using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without the button sequence. This is an excellent option if you want to give your car to valet parking or servicing. The immobiliser remains active.

The Ghost is an innovative and unique device that operates with your vehicle’s buttons rather than as a separate unit. This means that it is not just a highly effective security measure against theft from your vehicle but also a transferable device to any future vehicles you own, making it more valuable than the traditional lock on your steering wheel.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a high-tech security system that protects your car from key cloning and hacking. It also blocks ECU swapping. It’s a weatherproof and small device that communicates directly with your vehicle’s ECU via the CAN data bus, which disables the engine. It can be installed in the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are a common technique used by thieves to get around existing immobilisers.

The benefit of using CAN data is that it operates silently compared to traditional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies as well as identified by conventional diagnostic tools. The autowatch ghost installers ghost does not produce LEDs, but instead utilizes the buttons in your vehicle like the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app allows only one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost also stops car thieves from using the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run if a valid PIN code has been entered. It can also be put into Valet/Service mode for temporary operation (with set parameters such as 30mph speed limit) to allow you to transfer your vehicle to a valet service for maintenance without having to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket CAN bus immobiliser that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to disable your car’s system from running its normal start-up routine until you input a custom passcode. The system can be turned on and off using your own smartphone application without the need for wires.

Standard factory immobilisers on vehicles function by using an electronic transponder in the key, which sends an electronic signal to the ECU. If the correct code is sent, the car will start however if the transponder is replaced by one from a different vehicle, the immobiliser won’t recognize it. This allows the vehicle be stolen and started. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It protects you from key cloning or hacking, and even key theft. The only way thieves could take your car is physically towing it away, and even then they wouldn’t be able to drive it.

Ghost uses buttons on your vehicle, such as the indicator stalk, the steering wheel, and the door panels, to generate a unique PIN code that needs to be entered to use your vehicle. It does this without additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostic equipment and doesn’t transmit radio frequency signals, so thieves are not able to make use of sophisticated RF scanning or code grabbing techniques to discover that the security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks, ghost 2 immobiliser Installation near me is concealed within the vehicle to ensure that it can’t be removed or disabled by thieves. It is also harder to remove than a car alarm that requires disarming using an action sequence. This makes it an excellent complement to a GPS tracking device which can be used to track your vehicle after it’s been stolen.

Emergency PIN code override

You do not have to look far on social media to find stories or videos of vehicles that have been stolen with the most advanced technology tools. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle without your original keys.

The Ghost immobiliser was designed to stop this and offer an additional layer of security to prevent your vehicle from being targeted by thieves. It generates a unique pin code when pushing the buttons on your steering wheel, door panel and centre console. The unique pin code is entered in conjunction with your original key fob in order to stop the engine from beginning. The unique override pin can be located on a black card that you receive following your installation. It is simple to remember because there are no LED indicators.

The device is hidden inside the vehicle’s wires, and does not emit radio signals, therefore it cannot be recognized by thieves with diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to a tracking device.

Unlike other security systems, which use a relay in engine bays, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely through a digital block of commands to both the ECU and the engine.

These systems can also be connected to a separate analogue alarm immobiliser or tracker. This should be decided prior to installation. They are also service/valet-mode compatible and a good alternative to a tracker you are taking your car in for repairs to an electrical issue at the dealership.

Service/Valet Mode

In recent years there has been a rise in the number of vehicles being stolen with the owners’ keys. It’s more easy than ever to steal your pride and joy due to the availability of key cloning tools & door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been copied.

It connects directly to your vehicle’s ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, as it does not use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also protects against adding an additional key or replacing the ECU to bypass the system since only the correct PIN code can allow the engine to start.

The device is hidden within your car stolen with ghost immobiliser and is accessed by existing buttons on your steering wheel, the centre console and door panels. A unique and changeable PIN code sequence of up to 20 digits must be entered before you can start your vehicle.

This is the very first aftermarket CAN-bus immobiliser for the market that was developed. It will stop your vehicle from being started or driven in the event that you do not enter a PIN code before entering. If the device is activated and you attempt to drive away, it will display an indicator on your dash that will flash continuously for about 300m. If you type in your PIN code at this point it will deactivate the anti-hijack and your car will continue to drive in the normal way. If you don’t enter your PIN code at this point, the warning will continue to flash and require a new PIN code for every attempt to start your car.