Ghost 2 Immobiliser Problems

Designed to protect vehicles from hacking and key cloning, to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discreet device that can be fitted without causing damage to your vehicle. It prevents your vehicle from starting until you press a specific sequence of buttons inside your vehicle like a password on a mobile phone.

Stop/Start

Ghost Immobilisers protect vehicles from being stolen by stopping the engine from running until it is issued the correct PIN code. This is accomplished without altering the vehicle, and is largely undetectable by thieves. The unit communicates directly with the ECU through the CAN databus to lock the vehicle. This system is similar to the one automobile manufacturers have been using in their vehicles for a long time However, thieves isn’t able to add a key or use key relay technology to bypass it, as they can with factory fitted systems.

A ghost immobiliser reviews can be fitted to any vehicle, van motorhome, caravan, or bike with an engine and is compatible with all major brands of vehicles. The same system is also compatible with electric vehicles. It is an excellent alternative to locking the steering wheel and wheel clamps, and can be installed with little effort.

If the Ghost is activated it will block all buttons in your car and stop the ignition from starting without a PIN code. This can be done via the Android or Apple mobile app or by entering the code through your key fob. If the wrong code is entered the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great deterrent. when the vehicle isn’t initiated, the criminal will continue to pursue a new target.

The Ghost is small weatherproof device that is able to be concealed in the most difficult-to-access areas of your car. It is extremely easy to install and takes an average of 20-30 minutes for each vehicle. It is also easy to take off if you decide to switch vehicles, or even give it to an auto ghost immobiliser repair shop or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is endorsed by a few insurance companies. It also has a secure emergency Pin Code override and features a Service/Valet Mode that can be activated with the application’s button or using your key fob.

Disarm

Contrary to the mechanical devices, which are able to be removed, ghost immobiliser for sale immobilisers are hidden and integrated into the vehicle. They are virtually impossible to hack or bypass and, Ghost 2 immobiliser even if they are found, a thief cannot start the engine. This is because a ghost immobiliser prevents key hacking, signal jamming and device spoofing, all of which are methods that are commonly used by thieves to gain entry into vehicles that have standard immobilisers.

The immobiliser sends a message to the ECU. If a wrong code has been received and the vehicle doesn’t start as the engine won’t start. It is possible to disable a ghost immobiliser using an application program, but it is extremely time-consuming and difficult to accomplish this. Only an authorized installer is able to install and use the software.

The Ghost immobiliser is a tiny device that is tucked away in the wiring loom of your vehicle and is inaccessible to the naked eye after it has been installed. It doesn’t show up on diagnostic systems. There are no LED indicators and it isn’t able to communicate with the engine through the OBD port. It communicates silently through the CAN data loop.

The system will prevent the vehicle from starting until it receives a user defined PIN code sequence. This can be entered using buttons on the steering wheel or door panels, or on the centre console. This is a more secure way to protect your car since it doesn’t require a key fob or remote control.

Ghost also comes with a service mode that is activated through the mobile application. This allows you to give your keys to someone for valet parking or servicing without entering the disarm sequence.

You should never remove the system on your Ghost yourself, regardless of whether it is in service mode. This could cause damage to the engine. It is recommended to speak with an TASSA-certified installer who can safely and properly remove the system. Our most recent GHOST II immobilisers also come with a special QR fingerprint sticker that is hidden in various areas of your vehicle, which are linked to our global security register – in the event the system is removed and sold on the black market this will link it back to the original owner.

Anti-Hijack

The anti-hijack feature is a very important feature of the Ghost Immobiliser 2. This system functions as smart keys and is among the most secure ways to ensure your car is safe from theft. If the ignition switch is turned to on, and the car is stationary for 30 seconds, the Ghost system will stop the engine and turn on the hazards lights on. This gives the driver and passengers enough time to press the security button before the system is reactivated.

The Ghost system, unlike most competitors, utilizes a timer and controller unit that shuts off the valve that shuts off fuel after a predetermined time. This is even if the ignition remains on. This delay period should be long enough to allow the owner of the vehicle to leave the vehicle and a distance sufficient from the stalled car before the system can be activated.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an extra security feature that blocks common methods of hacking that are used to hack into modern cars such as relay attacks, key range extending and ECU swapping. The Ghost system communicates in a non-intrusive way and does not emit signals that can be snatched by thieves using codes-grabbing or RF scanning technology.

The Ghost system also comes with the Service/Valet mode that allows your vehicle to be temporarily started and driven without the need for PIN codes. This is great if you are parking your vehicle and have to be away for a short period of time, for example to put groceries in the boot or open a garage door etc. The system will exit the service mode based on the speed and time or by an easy PIN code input process. This gives you total peace-of-mind that only YOU can drive your vehicle!

Keyless Entry

With the increasing trend of theft of cars using contactless technology numerous people are considering additional security options. This is especially applicable to those who have put in time or money in personalizing their vehicle and own rare/expensive vehicles. A supplementary immobiliser is an effective way to avoid this kind of theft since it will stop your vehicle from starting unless the proper pin code is entered into your key fob.

Immobilisers are designed to impede a variety of vehicle circuits, including those that control the starter motor and the fuel pump. They also have the capability of shutting the car alarm to draw attention to and frighten away any potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit and they stop a burglar trying to bypass it by installing a brand new ECU or using an engine key programmer. These immobilisers are installed discreetly and leave no marks in your vehicle. They are also undetectable by hi-tech thieves’ tools.

The Ghost immobiliser is different from other systems which require the driver to wear a tag or an app. Instead, you can select your personal pin sequence by pressing the pattern on your steering wheel, Ghost 2 immobiliser door panel, or centre console. The pin can be changed as often as you’d like, meaning it is as secure as a credit card and can be more difficult to hack because it requires up to 20 press.

Ghost also has a Valet/Service mode, which permits users to deactivate it when you plan to surrender your vehicle for valet parking, or service. This allows the system to function within certain parameters such as a 30 mph speed limit. The system can be reactivated using the original key or entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser available on the market. It is insurance approved by Thatcham as an add-on for your car when installed by one of our certified installers. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels and an ISR contact card containing your unique QR code, as well as an emergency code that is secure, all of which are kept in your purse or wallet of your vehicle.