Choosing Upvc Window Replacement Hinges

It’s not as difficult as it may appear to choose and install Upvc replacement hinges. It is essential to verify that the arrows on the hinges is facing the right way and the thickness (13mm or 17mm) of the hinge arm on the opening frame.

There are a few different types of hinges to choose from, each with unique features. This article will discuss the most commonly used kinds of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

They are a great option to replace or upgrade your fire escape safety window as they open to a full 90-degree angle. They can also be removed to an easy clean position, allowing you to easily reach the outside of windows to clean them without the need to climb an overhang or climb a ladder at angles that could be dangerous.

Yale is among the most reputable and well-known brands in the field of home security. These hinges are suitable for any type of uPVC side hung window. They can be moved into the easy-to-clean position by pressing in the small button and sliding the window sash over to one side. After closing, the sash will automatically reset to its initial position.

Both 13mm and 17mm are available. Based on the size of your window, we recommend using our Egress Selection Guide to determine the best product for you.

These hinges are compatible with traditional side-hung frames made from aluminum or uPVC. They are equipped with a simple friction screw to adjust the amount of resistance that is generated. This makes opening the windows more simple and reduces the chance of closing the window accidentally during high winds. They have been tested to over 30,000 cycles and are compliant with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

With no buttons or catches the Nico Egress Easy Clean Friction Hinge is simple to operate and offers a practical solution to emergency egress as well as safe cleaning. Use the hinge retention clip located in the inner corner of the bottom corner. This will release both the catches on the top and bottom allowing you move the sash towards the easy-cleaning position. Once in the easy-clean position, close the window to return the hinges to their egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also called “Easy Clean”) are used to replace side-opening windows for fire safety reasons. These types of window hinges open more wide and faster than normal hinges, allowing a large clear opening to escape in the event of an emergency fire. This type of hinge is legal in any room that has windows, as required by building regulations.

The windows have an elongated friction that permits them to open to 90 degrees. They also allow the opening sash to slide across the glass hinge when it’s opened and allows for easy cleaning without the need to use ladders. The hinges are easy to use and have no complicated buttons or catch mechanisms. They can be operated from inside of the home using a simple, safe lever.

The hinges are manufactured in the UK by Cotswold and come complete with a child safety limiter for use throughout the day which can be turned off with a hidden button, giving you peace of thought that your children won’t accidentally open the window too far. They are available in 13mm and 17mm stack heights.

To order these hinges, simply measure the length of your existing side-hung window hinge that fixes to the frame (see the article on measuring your upvc window hinges). Choose the right size hinge from the list below.

Please note that the measurement is taken from the part that fixes to the frame, not the sash, the actual hinge length could be shorter or larger based on the manufacturing process of your old windows. When deciding on the size of the hinge, most frames made of upvc will have the 13mm stack height, but if your old window frame has 17mm, then select this option. You can also use the 4mm packer to compensate for Window hinges the difference. The hinges are available in two different directions (1 left and one right). Screws aren’t included with the hinges. If required, these screws can be purchased separately. We recommend using our Upvc window hinge repair screws. These screws are designed to increase the performance of your hinges and allow them to operate efficiently for a longer. They have a reduced-friction design and a heightened weather seal, which includes an encapsulated nylon reducer cap.

Restricted Hinge

There are occasions when a window needs to open fully and this can be a problem with hinges that are standard. These child safety friction hinges are a fantastic solution to this problem. They can be used in situations where ventilation is needed but escaping or cleaning an fire isn’t possible. They work by restricting the amount that the sash can open and allowing the control of this limitation with the push of a button. They are available in 13mm and 17mm stack heights. They can be used to open both side and top hung windows.

The Nico Restricted Egress Friction Hinges blend the advantages of a standard restrictor and a fire escape pivot to offer a simple and effective way to comply with building regulations. It is suitable for both side hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is available in two parts that has one hinge which is the one that is restricted for egress, and the other the unrestricted. This allows one to be installed at the bottom and the other hinge is placed at the top.

These uPVC hinges are designed to be used on windows that cannot be fully opened, like a child’s bedroom. The mechanism limits how far the sash opens up to 100mm in a safe distance, and re-engages once the window is shut.

These uPVC friction-type hinges can be used with any type of windows. They are particularly suitable for windows that are hard to reach, like those in three-storey houses or those that require the use of a ladder. They can be combined with our selection of security enhancements like hinge guards and protection plates, or dog bolts to offer PAS 24 performance.

When replacing a window hinge it is essential to measure the length of the existing hinge so that you can purchase replacements that are similar in size. The most efficient method to do this is to look at the hinge in the gallery and working out where you want it to be positioned. The top-hung hinges can only be placed on one side, whereas the side hung ones can only be placed on one side.

Standard Hinge

A standard hinge has metal-to-metal contact, and there are no additional parts to decrease friction. It is available in a variety of finishes and has a fire rating. For a quick way to determine the radius of your hinge, lay it flat and align a dime and quarter in two corners. If the dime is more snug, the corner is rounded by 1/4 inch; if the quarter fit better, it’s rounded by 5/8 inch.

The proper hinge can enhance or break the appearance of your conservatory door hinge replacement. It’s essential to match the style and finish of your door to the hinges to create a unified look that’s both functional and visually attractive.